Re: Apple II used 4116, not 2114

<x-flowed>
You can buy the heatsinks and epoxy from Digikey.com, I have no idea where
you can get those ram unless you want to sacrifice some old Galaxian
boards....they used 'em.

John :-#)#

At 11:03 PM 2/19/2001, you wrote:
>Darn glad I didn't just go put in $60 bids on all the ebay stuff :)
>
>Ok to continue this discussion I also need a source for 82S25's and those
>stinking single bit rams used in the final out put with the funky #'s,
>(rustles through manual). 93415 the ones under the heat sinks. And while
>on that subject where do I get the sinks and what should I use to glue them
>back on? Got a bunch of them with the sinks busted off.
>
>This is what happens when you pull out that box of 20 pac boards and decide
>that after 7 years of looking at them your actualy going to fix them.
>
>:)
>
>David
>----- Original Message -----
>From: John Robertson <jrr@flippers.com>
>To: <rasterlist@synthcom.com>
>Sent: Monday, February 19, 2001 5:54 PM
>Subject: Re: RASTER: Apple II used 4116, not 2114
>
>
> > You know, that's right. They do use the 4116's...he'll need another source
> > for those pesky 2114's
> >
> > John :-#)#
> >
> > At 07:17 PM 2/19/2001, you wrote:
> >
> > > >Apple II motherboards contain a 'mess', about 25 as I recall.
> > > > Includes another 30-40 socketed TTL chips.
> > >
> > >
> > >I worked on a couple of hundred Apple II motherboards, and I can swear
>that
> > >they use 4116 dynamic RAMs, not the static 2114's. They are a good buy
>at a
> > >junk store, though.
> > >
> >
> >---------------------------------------------------------------------------
> > >** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in
>the
> > >** message body to rasterlist-request@synthcom.com. Please direct other
> > >** questions, comments, or problems to neil@synthcom.com.
> >
> > --------------------------------------------------------------------------
>-
> > ** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in
>the
> > ** message body to rasterlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
>** message body to rasterlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.

</x-flowed>
Received on Tue Feb 20 08:24:34 2001