Re: Modifying my metal control panel...

Be careful now, using 1/2" plywood might shorten the joysticks too much
or give you problems with button mounting (if old-style buttons).
Perhaps Masonite would do the trick, it's only 1/8" thick and is hard as
hell.

Andrew Wilson wrote:
>
> > Or cut some
> > 1/2" plywood and secure with carriage bolts.
> >
>
> I've been thinking about this option, too - the nice thing is that the
> joysticks are already held in place using carriage bolts, so they'd help to
> secure the wood. I'm going to ask around to see if I can find someone who
> can do sheet metal work to just replace the whole thing, but if I can't get
> it done cheaply enough I can do this as a fallback.
>
> -atw
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
> ** message body to rasterlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Sat Mar 30 22:31:29 2002