Re: Unknown board...

<x-flowed>
I don't know that board, but you could post this message to the newsgroup
rec.games.video.arcade.collecting

John :-#)#

At 02:27 PM 27/04/2002 -0400, James R. Twine wrote:
> Hello all...
>
> As I was going through a part of my PCB collection, I came across an
>unknown board (quite dirty, and a bit damaged) that I would like to
>identify and (try to) repair.
>
> It has no writing on it other than component names/types and the
>text: "EAGLE 6101-A PROGRAM JAPAN MADE IN KOREA" on the corner of the
>board.
>
> The board has a 18/36 pin card-edge connector on it, 2 8-switch DIP
>switch packages, and has a daughtercard that plugs into the board at a
>40-pin socket connector (I think it hosts the CPU).
>
> The daughtercard has an additional 10/20 pin card-edge connector on
>it as well as another 8-switch DIP switch package, and a black plastic
>package with no markings on it that looks like it could hold 2 Z-80s
>stacked on top of one another. Some hacking has been done on the main
>PCB underneath where the daughtercard connects (visible in the photo),
>as well as a few routes/jumps made on the underside.
>
> There is a picture of it at http://www.jrtwine.com/jtwine/unkpcb1.png
>(73KB), and another picture of the board with the daughtercard centered
>over it (not the normal position of the daughtercard!) at
>http://www.jrtwine.com/jtwine/unkpcb2.png (76KB). The board has not
>been cleaned yet, and I cannot easily remove the two large white labels
>(yet). There is no visible writing on the white labels, and the
>stickers on the ROMs read "G-4", "G-5", "G-6", "G-7", "G-8", "G-11",
>"G-12", and "G-13".
>
> I have found a few pinouts for "Eagle" in the 'Net, but none with an
>18/36 pin connector AND the daughtercard connector. Any thoughts will
>be helpful...
>
> Peace!
>
>[Download Check Favorites Now!
>http://www.jrtwine.com/Products/CheckFavs]
>-=- James R. Twine, MCP, (jtwine@jrtwine.com)
>-----BEGIN GEEK CODE BLOCK-----
>Version: 3.12
>GCS d- s+:+ a28 C++++$ UL+++>++++ P+ t+++ 5+ X+++ tv+
>b++ DI++ G++ h e(++) r++ W++ N+++ w++(+++) M-- PS+
>------END GEEK CODE BLOCK------
>
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
>** message body to rasterlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.

</x-flowed>
Received on Sat Apr 27 12:48:44 2002