Re: CC2 Amp chip?

MB3730 is 7 pins.

http://www.arcadeshop.com/galaga/galaga.htm

for picture & maybe source.

Kev

> All pins in a row... At first I thought this list would be a GREAT help
> .... Till I went back and checked the chip.. it has 7 pins (and a big
> hole in the center... No.. that dark spot is not a shadow of the
> mounting nut) Look! http://www.basementarcade.com/ccchip.jpg
>
> Rodger Boots wrote:
>
> > Are the pins in a row or staggered?
> >
> > Staggered 12 pin= MB3736 or MB3737.
> >
> > Straight 8 pin? MB3730 or MB3732.
> >
> > Straight 9 pin? MB3734 or MB3745.
> >
> > Straight 12 pin? MB3731 or MB3733 or MB3736 or MB3737.
> >
> > The MB3735 is monophonic, all other have two channels.
> >
> > (Probably no help at all, but research is my life!)
> >
> >
> >
> > Mark E Davidson wrote:
> >
> >>Anyone here own a Crazy Climber 2 board? My audio amp chip decided to
> >>explode over the weekend blowing a chip right out of the center of it
> >>and is leaving me guessing on its value The most I can read off it is
> >>MB373.... What ever comes after that last 3 is missing :-(
> >>
> >>-=Mark=-
> >>
>
>>--------------------------------------------------------------------------
-
> >>** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in
the
> >>** message body to rasterlist-request@synthcom.com. Please direct other
> >>** questions, comments, or problems to neil@synthcom.com.
> >>
> >
>
> --------------------------------------------------------------------------
-
> > ** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in
the
> > ** message body to rasterlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
> >
>
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to rasterlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Jul 03 14:06:57 2002