Re: Gorf & Targ

Well, I wish I could. The only other raster (I have plenty of vector
games :-) I have is a Space Invaders and it is custom fit to the
cabinet (as far as I can tell).

I will look up the tshooting guides. Thanks

-Marlin

On Monday, September 8, 2003, at 02:11 PM, Al Warner wrote:

> Question:
>
> Are these your only games? If not, plug the monitor from another game
> into the two dead games and make sure you're getting a picture. Then,
> diagnose the existing monitors or replace them.
>
> There are web resources with troubleshooting guides for GO7 monitors.
> You
> can also try the reverse - putting one of these monitors in another
> game.
>
> Be very careful when moving monitors around, the monitors can contain a
> high voltage charge even when shut off.
>
> Good Luck!
>
>
>
>> Thanks. I checked both (they are both Electrohome G07) and both are
>> getting 120VAC and all fuses check out good.
>>
>> Next? :-)
>>
>> On Sunday, September 7, 2003, at 11:36 PM, peter jones wrote:
>>
>>> -----Original Message-----
>>> From: Marlin Bates <mcb242@psu.edu>
>>> To: rasterlist@vectorlist.org
>>> Date: Sun, 7 Sep 2003 20:25:01 -0700
>>> Subject: RASTER: Gorf & Targ
>>>
>>>>
>>>> Hello folks,
>>>>
>>>> I just picked up a Gorf and a Targ. Both play blind with no
>>>> picture.
>>>> There is no neck glow on the tubes. All fuses look good. Any
>>>> suggestions?
>>>>
>>>> Thanks
>>>>
>>>> -Marlin
>>>>
>>> start with the basics, put a meter on the monitor power connectors
>>> and
>>> see if you get 100-120v ac.
>>>
>>> if you do then look on the monitors for fuses,
>>> post the monitor make/model if you reply to this - and if they are
>>> wells-gardner 4600 style with vertical pcb's then you need to remove
>>> the base pcb and resolder all the sockets.
>>>
>>> ---------------------------------------------------------------------
>>> --
>>> ----
>>> ** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE"
>>> in the
>>> ** message body to rasterlist-request@vectorlist.org. Please direct
>>> other
>>> ** questions, comments, or problems to chris@westnet.com.
>>>
>>
>> ----------------------------------------------------------------------
>> -----
>> ** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE"
>> in
>> the ** message body to rasterlist-request@vectorlist.org. Please
>> direct
>> other ** questions, comments, or problems to chris@westnet.com.
>
>
> -=-=-=-=-=-=-=-=-=-=-=-=-
> Visit Al's Arcade
> http://www.alsarcade.com
> -=-=-=-=-=-=-=-=-=-=-=-=-
>
>
>
> -----------------------------------------------------------------------
> ----
> ** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE"
> in the
> ** message body to rasterlist-request@vectorlist.org. Please direct
> other
> ** questions, comments, or problems to chris@westnet.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com.
Received on Mon Sep 8 18:27:47 2003