> I see a fuse hardwired to the chassis, but need to see the schematic to see
> if this might be why the monitor is not seeming to get power. The fuse has
> a (dirty) plastic tube around it so I cannot tell if it is fried.
>
meter it at the solder joints, or remove it for testing.
if it's blown you need to find out why anyway - but that's easy enough.
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Feb 27 00:09:16 2005
This archive was generated by hypermail 2.1.8 : Sun Feb 27 2005 - 00:50:01 EST