> The Journey manual mentions the self test, but does not provide any
> information for any problems or codes that are displayed. The Bally MCR
> manual also mentions self test, but doesn't give any information on any
> codes reported.
Joe,
The FAQ is at
http://www.journey-tribute.com/journey/resources/arcade/journey_ballymidway_faq.html
(that's a long line - you may need to re-join it).
It gives the codes for the sound-board LED.
The two most likely causes are:
1. a RAM fault on the sound section (rarely tested properly in self-test),
2. communication fault between main CPU and sound CPU.
Mark
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Jun 19 05:14:39 2006
This archive was generated by hypermail 2.1.8 : Mon Jun 19 2006 - 05:50:01 EDT