-----Original Message-----
From: Tim Soderstrom <tim@moocowproductions.org>
To: rasterlist@vectorlist.org
Date: Thu, 14 Sep 2006 11:09:48 -0500
Subject: Re: RASTER: Re[2]: RASTER: Ms. Pac-Man Monitor (WG?) bends UPDATE
>
> Alright so all I had lying around was 1500 grit metal polishing
> sandpaper. That seemed to pickup some of the grift, however. The
> fuses are less than a year old and look to be in great shape as well.
> The only problem is, that didn't really fix anything :/ The hum is
> still on the speaker and the bar on the right hand side of the
> monitor is still there.
the hum on the speaker is poor capacitors in the amp/psu circuits not smoothing the 50/60hz mains hum.
probably the cause of the bar too.
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Sep 14 18:05:20 2006
This archive was generated by hypermail 2.1.8 : Fri Sep 15 2006 - 12:50:03 EDT