-----Original Message-----
From: Tim Soderstrom <tim@moocowproductions.org>
To: rasterlist@vectorlist.org
Date: Mon, 30 Oct 2006 10:07:40 -0600
Subject: Re: RASTER: Re[2]: RASTER: Re[2]: RASTER: Green Color Maxed out on WG 4600
>
> One thing I'm still concerned with, however. When the time comes to
> pull the K4600, do I need to discharge it before I pull it?
the only time you need to discharge a tube is when you remove the boards from the tube,
and it's only a safety thing incase you brush against the exposed anode point on the tube.
many of us just dont bother discharging them at all, we are just carefull not to touch the anode on the exposed tube.
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Oct 30 11:29:56 2006
This archive was generated by hypermail 2.1.8 : Mon Oct 30 2006 - 12:50:00 EST