Yes, I have the service manual, user manual and wireing diagrams. I have located RAM 8 and have reseated it (a bit of wishful thinking). I will look tonight and see if there is another RAM IC with the same PN and swap the two. I will also do some research on the availability of this IC.
COLIN DAVIES <colin.w.davies@btopenworld.com> wrote: Have you got the service manual or user manual - They often list which parts are related to the error codes in the diagnostics / self test.
I'd love for my Namco Pole Position Board to just display something similar ( In fact still looking for the namco version specific info as the pinouts are different.)
Good luck, Colin
peter jones <highwayman2000@mail.ru> wrote:
-----Original Message-----
From: Cameron Rector
To: rasterlist@vectorlist.org
Date: Fri, 11 May 2007 09:26:48 -0700 (PDT)
Subject: Re: RASTER: Re: RASTER: RAM 8 Pole Position
>
> That's good advice, I thought of that last night after shut down for the evening. I was also wondering if this is a common device that I might be able to harvest from another PCB I had laying around. I haven't researched but, with my luck; I was specifically manufactured for Atari. Does anyone know how common this device is?
>
not unless you post the part-number LOL
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri May 11 12:54:18 2007
This archive was generated by hypermail 2.1.8 : Sat May 12 2007 - 09:50:01 EDT