-----Original Message-----
From: Dustin Holden <discuspro@yahoo.com>
To: rasterlist@vectorlist.org
Date: Sat, 12 Jan 2008 00:40:40 -0800 (PST)
Subject: RASTER: G07-cbo haziness
>
> Having trouble trying to get the color right on my
> g07. I changed out the three video output transistors
> on the neck board X101, X102 & X103 because I cannot
> seem to remove a blue intense haziness on the whole
> screen. Cap kit's already been done. Not a tube
> problem because I tried on other tubes. Not a game
> problem. I can see my games running in the
> background. I can see red and most other colors but
> they are all drowned out by blue. Where there should
> be complete black it is blue. The monitor was shorted
> somehow previous to my owning it so it wasn't working.
> I replaced the power regulator transistor X02 and got
> the monitor up and running.
>
it's probably the neckboard,
before you do anything else swap the blue & red drive wires going into the neckboard,
if it's still all blue you know it's the neckboard.
next lift & meter all resistors & capacitors in the blue circuit on the neckboard.
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Jan 12 12:48:47 2008
This archive was generated by hypermail 2.1.8 : Sun Jan 13 2008 - 02:50:00 EST