Re: Re[2]: Re[2]: Re[2]: Re: G07-cbo haziness

I performed the white balance adjustment. B+ was
checked again at 120V DC. So I switched the correct
blue and red neckboard wires and so I got a red
haziness instead of blue. I'm in the process of
testing blue signal transistors, resist. and caps.

--- peter jones <highwayman2000@mail.ru> wrote:

>
>
> -----Original Message-----
> From: John Robertson <pinball@telus.net>
> To: rasterlist@vectorlist.org
> Date: Mon, 14 Jan 2008 10:35:54 -0800
> Subject: Re: RASTER: Re[2]: RASTER: Re[2]: RASTER:
> Re: RASTER: G07-cbo haziness
>
> >
> > Have you done the White Balance adjustments on the
> neck board as
> > described in the manual? There are no colour or
> contrast adjustments on
> > your monitor chassis by the way...
> >
> > John :-#)#
>
> before doing anything like that you should ajust the
> B+ voltage according to the instructions in the
> manual.
> specially if you changed the capacitors.
>
>
---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or
> problems to chris@westnet.com
>

      ____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Jan 15 21:33:45 2008