Re: SID Graphics problem

Most all video problems on those old Midway B&W games were caused by bad
connections between the two boards. Graphic movements were done by pulling
the image from ROM on the motherboard, then sending the data to the barrel
shifter chips on the daughter card, then sending the data BACK to the
motherboard and exclusive ORing it with data already in RAM (should have
been blank data there). Then to move object you first erase it by repeating
all of the above (erases image in RAM) then redo the above AGAIN with the
new image and shift amount.

So, all it takes is ANY bad connection between boards or bad socket on a
barrel shifter and the video will go wonky. This is always a good place to
start.

On Wed, Oct 27, 2010 at 9:43 PM, Kevin Moore <talon.k@gmail.com> wrote:

> Got a SID that crapped out on me. Not a yoke wiring problem, as this was
> working fine, and no monitor work has been done.
> Using a Braze kit which is known good.
>
> Text is Backwards
>
>
>
> Invaders appear semi correct, but are split on the ends, and in the wrong
> order. Shields are split as is the laser base. Plus the laser base is on top
> shooting down, and scores are on the bottom.
>
>
>
> [image: Edit/Delete Message]<http://forums.arcade-museum.com/editpost.php?do=editpost&p=1388269>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Oct 28 01:40:22 2010