Re: Monitor ID help

Thanks for your help John, I will check it out.

Chuck

On Mar 9, 2011, at 12:26 AM, John Robertson wrote:

> Chuck wrote:
>>
>> John,
>> Did you by chance find a schematic for the CH-281 monitor? I
>> searched and searched, but all I can find is the CH-288 monitor
>> schematics. I did find a couple of places that Pentranic says to
>> just use the CH-288 schematic, but I wonder what the difference is?
>>
>> Thanks,
>> Chuck
>
> Hi Chuck,
>
> No luck so far. You know there is a good forum on monitor repair run
> by a Canadian company in Alberta. The site is vendoramusements.com
> and follow the link and register for the forum.
>
> At this time they too have no additional info on that model, but it
> can't hurt to ask on the forum itself.
>
> John :-#)#
>>
>>
>> On Mar 2, 2011, at 9:53 PM, John Robertson wrote:
>>
>>> Chuck wrote:
>>>>
>>>> Teeray,
>>>> You are the man, thanks for the ID on the monitor!
>>>>
>>>> John,
>>>> Thanks a bunch for your help too! I did a search for the
>>>> schematics and had no luck finding them. Do you have that
>>>> schematic in pdf or is it hard copy?
>>>>
>>>> Thanks,
>>>> Chuck
>>> Hi Chuck,
>>>
>>> I only have the CH-288 schematics, not the CH-281, however I am
>>> asking around...
>>>
>>> John :-#)#
>>>>
>>>>
>>>>
>>>> On Mar 2, 2011, at 6:24 PM, John Robertson wrote:
>>>>
>>>>> teeray wrote:
>>>>>>
>>>>>> 26" Pentranic 15k CH-281-26
>>>>>>
>>>>>> http://www.zax.com.au/spare_parts/popups/pentranic-ch07.html
>>>>>>
>>>>>>
>>>>>>
>>>>> Good call, I have schematics for this beast if the original
>>>>> posted can't find them online...
>>>>>
>>>>> John :-#)#
>>>>>> -----Original Message-----
>>>>>>
>>>>>>> From: Chuck <chuck@localsurfer.com>
>>>>>>> Sent: Mar 3, 2011 3:30 PM
>>>>>>> To: rasterlist@vectorlist.org
>>>>>>> Subject: Re: RASTER: Monitor ID help
>>>>>>>
>>>>>>> Yes, I have tried Bob Roberts page. I even sent him the link
>>>>>>> to the
>>>>>>> pictures directly and he did not know this one. I have had it
>>>>>>> for a
>>>>>>> while and want to get it up and running. Been in the way for a
>>>>>>> long
>>>>>>> time. It came out of a Dynamo cab, but I am not sure if it is
>>>>>>> the
>>>>>>> original monitor for that cab.
>>>>>>>
>>>>>>> Chuck
>>>>>>>
>>>>>>> On Mar 2, 2011, at 9:14 AM, Christopher X. Candreva wrote:
>>>>>>>
>>>>>>>
>>>>>>>> On Tue, 1 Mar 2011, Chuck wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>> I have a monitor that I can not ID. Hopefully someone here
>>>>>>>>> can tell
>>>>>>>>> me what it
>>>>>>>>> is and maybe point me in the direction for getting a
>>>>>>>>> schematic?
>>>>>>>>> Here is a link
>>>>>>>>> for some pictures of it:
>>>>>>>>>
>>>>>>>>> http://localsurfer.com/monitor/
>>>>>>>>>
>>>>>>>> Have you tried Bob Roberts' Monitor ID page ?
>>>>>>>>
>>>>>>>> http://www.therealbobroberts.net/monitor.html
>>>>>>>>
>>>>>>>>
>>>
>>>
>>> --
>>> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
>>> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
>>> www.flippers.com
>>> "Old pinballers never die, they just flip out"
>>>
>>
>
>
> --
> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
> www.flippers.com
> "Old pinballers never die, they just flip out"

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Mar 9 10:01:50 2011