RE: test equipment

Ok, this thread is fun. :-) My turn:

Fluke 9010, with probe, RS-232, Z80, 6502, 6809, 8088 pods and compiler
Tektronix 1240 Logic analyzer, one 9-channel and one 18 channel card + pods,
RS-232
Tektronix 1241 Logic analyzer, on 9-channel and three 18 channel cards +
pods, RS-232
Tek 1240 Mnemonic/expansion packs: Z80, 6502, 6809, 68000, 68HC11, 8088,
8086, serial, parallel, etc.
American Arium ML4400 Logic Analyzer w/ 68000/68040 pod and mnemonics
American Arium ML4400 Logic Analyzer w/ misc pods and all mnemonic loads
through 80486
American Arium Z-80 ICE (broken cable... grrrr.)
HP 5004 signature analyzer
Tektronix TDS220 100MHz digital scope
Tektronix TDA720 100MHz hand-held scope
Tenma 40MHz analog scope with cursors
B&K 20MHz analog scope with component tester (like a tracker)
Huntron Tracker 4000
EMUP Device Programmer
EPP 8-gang EPROM programmer
PicStart Plus (Pic programmer)
Atmel AVR programmer
Xilinx JTAG programmer
Vantis JTAG programmer
Lattice JTAG programmer
Ceibo Philips 87LPC76x ICE
Philips 87LPC76x programmer
(you can never have enough programmers around. ;-)
CST-700 RAM tester (4116 to 4Mbit tester, but no software for anything
smaller than 4164.... grrrr.)
OK Industries 9000 Microprocessor Controlled Fluid Dispenser (for solder
paste)
OK Industries Hot-air solder pencil
OK Industries SMT solder-tweezers
OK Industries vacuum-pick
Metcal SST-01 Iron and tips
Weller 4424 solder/desolder station
Weller Fumex solder fume extractor
PACE MBT solder/desoldering station
Intel USB microscope (way entertaining! cheap surface mount inspection...)
Hakko 850 Hot-air rework station
Chip Level Designs Super Nintendo ICE
Romulators (Genesis and SNES-- going to try to build some 16-bit wide ROM
emulator adapters)
Acer 7013 VGA multisync (works at 15KHz) that refuses to die no matter what
I do to it.
Fluke 77 meter, etc.
PC's to talk to everything
Stanley 18oz framing hammer (solves *multitudes* of PCB problems at 3AM)

-Clay
Received on Thu Mar 02 15:15:49 2000