Re: WTBorrow: Fluke 6809 pod

Now if you could do 6809 or 6502 on the Series 90 unit.....

> I was using the 9010 today and accidentally plugged a 6502 pod into a
board
> that used a 6800 processor. Hmm, could read and write to RAM, and do a ROM
> checksum test, only when I tried to "RUNUUT" did I notice the error. No
> risk to the pod as the 6800 and 6502 share the same Vcc and Gnd lines, as
> well as Data and Address lines and some of the clock and I/O ports. R/w is
> the same for example...I think a 6502/6800/6802/8 multipod may not be so
> much trouble after all...anyone have lots of free time?
>
> I was able to get the Series 90 8085 test fixture to become a Z80 unit,
> just tidying up the rather messy sketches before I show how it works. Have
> the code for that as well...

 To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the
 message body to: techtoolslist-request@flippers.com. Please direct other
 questions, comments, or problems to jrr@flippers.com.
Received on Thu Aug 10 10:51:42 2000