Re: VECTOR: Fluke 9100A Software needed

Get this, it should allow you to do a 'raw' image copy
of the floppy discs to your Windows PC, and copy it
back out to another floppy, before using them.
http://uranus.it.swin.edu.au/~jn/linux/rawwrite.htm

I haven't used it for this purpose, but I know it does it...

Unless it's an old 5.25" floppy?
There are other utils for the PC that will do a raw copy,
let me know if you need it...

Marc

> Technically, it is possible to copy the disks. There
> is a disk copy function in the 9100 software. The
> only catch is... unless you have a working system
> already running, you are going to have to use the
> disks to get the machine running in the first place
> and then the whole "marking the disks specifically for
> the machine" deal kicks in. Dave, know anybody with a
> working system that can dupe them for you before you
> use them?
>
> -Chris
>
>
>
> --- John Robertson <jrr@flippers.com> wrote:
> > Can you ask your friend in Holland if these can be
> > duplicated for other
> > 9100 owners? I have a working unit that I have never
> > tried to figure out,
> > but it would be nice to have backup setup discs.
> >
> > If permitted, could you make disc images for
> > distribution to the owners of
> > 9100's?
> >
> > John :-#)#
> >
> > At 02:42 AM 30/08/2001, you wrote:
> >
> > >Hi again ...
> > >
> > >A very nice man at Fluke in Holland just phoned me
> > and agreed to send me
> > >the 2 system disks and the 3 firmware disks for
> > free !
> > >
> > >:o)
> > >
> > >
> > >Dave Langley
> > >www.robotron-2084.co.uk
> > >
> >
> >---------------------------------------------------------------------------
> > >** To UNSUBSCRIBE from vectorlist, send a message
> > with "UNSUBSCRIBE" in the
> > >** message body to vectorlist-request@synthcom.com.
> > Please direct other
> > >** questions, comments, or problems to
> > neil@synthcom.com.
> > >
> > >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
> http://im.yahoo.com
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>
Received on Thu Aug 30 19:53:09 2001