RE: HP logic comparator

I've got a 54645D with the Benchlink suite, what were you wanting to know??

                James

-----Original Message-----
From: Kev [mailto:KKlopp@erols.com]
Sent: Wednesday, October 03, 2001 8:39 AM
To: TechToolsList@flippers.com
Subject: Re: HP logic comparator

AKA BugTrap. http://users.erols.com/mowerman/bugtrap.htm

There is also a CMOS version.

On mine & all I've seen there is a setup of toggle switches that you throw
to remove power & ground pins from the UUT.

I scanned documentation for my units, they are here....

http://www.spies.com/arcade/TE/index.html

Under ECOMMS.

Anyone using HP scopes, series HP546XX? I'm interested in the Benchlink
Software & usage tips.

Thanks,
Kev

> Hi all,
>
> I just got one of these a few weeks ago and it's a really cool tool. You
> clip it on suspect TTL chip and put a reference TTL chip inside the
housing
> and it will show you any difference in the logic states between the two
> chips.
>
> I have one question though for anyone who might use one of these. The
> manual implies that you can use it on 14-pin DIPs as well as 16-pin
> DIPs. It works fine on 16-pin ones but I can't get it to work on 14-pin
> ones. Is there something I'm missing or not doing correctly? Do I need
> to jumper a ground connection for the last two pins hanging off?
>
> Thanks for any suggestions.
>
> Werner Sharp
> sharpw@bellsouth.net
>
>
> To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in
the
> message body to: techtoolslist-request@flippers.com. Please direct other
> questions, comments, or problems to jrr@flippers.com.
>
Received on Wed Oct 03 08:14:48 2001