<x-flowed>
Digi-Key.com provides cables that can replace the original Fluke. Order the
40 pin DIP #C2PXG-4018G-NC, which is a 40 pin DIP-grey cable-18 inches long
with an unfinished end, then get the 40 pin header #AKN40A-ND and put it on
(I use a vise to squeeze the connector onto the cable). Total cost in
Canadian ~ $12 plus shipping. US$ is about $8...Fluke wants $300US!
John :-#)#
At 08:41 AM 10/26/01, you wrote:
>Hi all ...
>
>Well since my 9100A died I managed to get a 9010, alas I am doomed to be
>the keeper of lots of dead fluke hardware as the 9010 is completely dead!
>
>The PSU tests out OK, but I've not looked at anything else. Also I
>noticed it does not have the RS232 option ... if I get it working has
>anyone got one of these for sale?
>
>Now onto the pods ... the 6802 and 8085 pods were both shipped without
>the cable in the self test socket. Guess what both have a pin broken off :o(
>
>Has anyone ever replaced these ribbons/headers with a home made effort?
>
>PS I have not forgotten about those who wanted the 9100 software but I
>cannot currently copy it. It's being sent onto someone who can for
>distribution.
>
>
>Dave Langley
>www.robotron-2084.co.uk
>
>To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the
>message body to: techtoolslist-request@flippers.com. Please direct other
>questions, comments, or problems to jrr@flippers.com.
</x-flowed>
Received on Fri Oct 26 10:05:47 2001
This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 18:40:38 EST