Re: Fluke 9010 Tape Drives

<x-flowed>
Hi Dave,

One problem I found with the tape drives is the drive belt. You should be
able to pick a similar belt at a TV/VCR repair shop. You will need to take
the drive with you to size it. If anyone needs one and can't find it I am
willing to make a run to my local wholesaler and pick up a pack of them,
but there is a charge for that part as a result...time...

You can also remove the tape drive and set it on top of the 9010 to see if
it works and run the tests as covered in the Fluke service manual that is
stored on http://www.spies.com/arcade/TE/index.html (Thanks to Al Kossow
for archiving this!)

John :-#)#

At 06:53 PM 06/02/2002 +0000, Dave Langley wrote:
>Since my tape drive does not work I really need to get a replacement for
>it or fix it.
>Has anyone ever repaired a fluke 9010 tape drive?
>
>I'm still looking for an RS232 card too ...
>
>
>Dave Langley
>www.robotron-2084.co.uk
>
>To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the
>message body to: techtoolslist-request@flippers.com. Please direct other
>questions, comments, or problems to jrr@flippers.com.

</x-flowed>
Received on Wed Feb 06 11:59:23 2002