Re: Guided Fault...

<x-flowed>

Went faster than I thought. Only a few typos, it now compiles and I have
posted it to the web ftp page @ ftp.flippers.com in the FLUKE section.

Take it away!!!

John :-#)#

At 10:00 PM 04/03/2002 +0000, Peter Fyfe wrote:

>Guys,
>
>I've type up programs 23 to 27 and sent them to John. Hopefully that should
>be us covered.
>
>Regards
>
>Peter
>
>----- Original Message -----
>From: John Robertson <jrr@flippers.com>
>To: <techToolsList@flippers.com>
>Sent: Friday, March 01, 2002 5:26 PM
>Subject: Re: Guided Fault...
>
>
> >
> > At 11:56 PM 28/02/2002 -0800, John Robertson wrote:
> >
> > >Got it scanned in, check for it on ftp.flippers.com/Fluke/PDFs . I have
> > >done GuidedFault-3-4-9-20.s which is program 3, 4, 9, and the start of
>the
> > >listing for program 20.
> > >
> > >There remains the following:
> > >Program 3, 4, 9, 20 (page 12) - John :-#)#
> > >Program 21 (bottom of page 12, page 13, middle of 14) - Kev
> > >Program 22 (mid 14 - mid 17 (longest one...) - Jon R
> > >Program 23 (mid 17 - top 18) - John :-#)#
> > >Program 24 (top 18 - bot 18) - ?
> > >Program 25 (bot 18 - top 19) - ?
> > >Program 26 (top 19 - bot 19) - ?
> > >Program 27 (bot 19 - bot 20) - ?
> > >That's all.
> > >
> > >So if there are any volunteers, could they put their name behind a
>program
> > >number? Like mine.
> > >
> > >My "GuidedFault-3-4-9-20.s" is one directory up (Fluke), you can add to
>it.
> > >
> > >Remember that the comments are deliniated with a '!', and the line of
> > >program must be in a single line, that is if you are using RKSIC.EXE as
> > >the compiler.
> > >
> > >I find that wordpad works fine for writing these up and then save in
> > >unformated text and change the ending to ".s" from the ".txt" that
>wordpad
> > >likes...
> > >
> > >This booklet is great reading for explaining how to layout programming
> > >steps to handle setting up guided fault isolation routines.
> > >
> > >John :-#)#
> >
> >

</x-flowed>
Received on Mon Mar 04 19:28:55 2002