<html>
I'm posting this for Pete as MajorDomo is having trouble with it directly from him....I hope this gets through! This isn't off-topic as it concerns USING test equipment...<br><br>
John :-#)#<br><br>
(From: Invadar <invadar@mean-machine.org.uk> )<br><br>
I am trying to repair an "EGGS" board using the fluke 9010A but cannot get <br>
it to work on the fluke due to a message TIME OUT attempting reset. <br>
I have narrowed it down to a clock fault. <br>
The clock for the CPU is derived (in part) from the bipolar rom at loc B4. <br>
which <br>
I suspect is faulty. <br>
I have located the bpr in mame but it is in HEX format. <br>
can anyone help me to convert this to a binary file (how do I do it) or <br>
does anyone have the binary version so that I can get on. <br>
If you consider this off topic I sincerly appologise but i am desperate. <br>
Any help would be most appreciated. <br>
Thanks Pete (Invadar)<br>
<x-sigsep><p></x-sigsep>
How to subscribe/unsubscribe from the list:<br><br>
To do either you send email to "MajorDomo@flippers.com" and in the body you state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist", note that the Subject is "" (Blank)...</html>
Received on Fri Apr 19 11:44:38 2002
This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 18:40:42 EST