<html>
So far all I've found on the tapes are the Tape MERGE binary, the Unsigned Add binary, and the Frequency Counter binary. All work - the frequency counter is very fast at recognizing the freq, goes from 10Hz to 6mHz. Neat!<br><br>
I still have no idea how to transfer any binaries out the RS-232 port, although reading the Utility Programs User Manual (9000A-910) it does say "A binary program is compiled on a host computer and then downloaded to the 9010A/9005A, using the AUX I/F function. A binary program can be read/written from and to the cassette tape just like other programs. It can be uploaded/downloaded to or from a host computer and is executed in the same manner as other programs (including use as a subroutine of another program)." I suspect it is an obvious function that I just have't caught - the upload/download via the RS-232, but not yet...<br><br>
John :-#)#<br>
<x-sigsep><p></x-sigsep>
<font face="Arial, Helvetica">How to subscribe or unsubscribe from the list:<br><br>
To do either you send email to "MajorDomo@flippers.com" and in the body you state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist", note that the Subject is "" (Blank)...</font></html>
Received on Sun Jun 09 00:15:35 2002
This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 18:40:45 EST