Re: Binaries

Great! So it' will be a simple matter to toss in the freq counter program
for other script programs.

Thanks,
Kev

>
>So far all I've found on the tapes are the Tape MERGE binary, the Unsigned
>Add binary, and the Frequency Counter binary. All work - the frequency
>counter is very fast at recognizing the freq, goes from 10Hz to 6mHz. Neat!
>
>I'm too tired...the BINARY programs are sent to the RS-232 by the command
>AUX I/F - WRITE. The BINARY code is then dumped out the RS-232 port. The
>RKSIC program was calling it "Receive Hex File from 9010A"
>
>So I WILL be able to save the Utilities (above) and store them on the FTP
>site! Sunday...
>
>John :-#)#
>
>How to subscribe or unsubscribe from the list:
>
>To do either you send email to "MajorDomo@flippers.com" and in the body you
>state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist", note
>that the Subject is "" (Blank)...
>
Received on Sun Jun 09 09:10:04 2002