<x-html>
<html>
Thanks to Kev and Zonn for the original DUMPER.ZIP setup. <br><br>
I just fixed a rotten Atari Football (4 player) by first downloading the
PROMs (16 of the suckers 1K X4) directly from the board, then burning the
image into a single 2764. <br><br>
Next using two 74LS86 gates to set the <u>OE</u> (the first one picking
off Program 0 and 1, XORing them, then use the second XOR gate to invert
(tie one input high) and the resulting output drives the <u>OE</u> just
fine. Grab A11 and A12 lines (bend the legs out of the 2764) and tie pins
26, 27, 28 & 1 all together and it works just fine to replace the 16
PROMs.<br><br>
Now I don't have to replace lots of sockets/PROMs with corroding
legs...<br><br>
John :-#)#<br><br>
At 04:26 PM 01/08/2002 -0700, Zonn wrote:<br><br>
<br>
<blockquote type=cite class=cite cite>On Thu, 01 Aug 2002 16:07:07 -0700,
John Robertson <jrr@flippers.com> wrote:<br><br>
>To continue this a bit, I wrote a simple dumper (based on the one in
the <br>
>Programming manual) that runs a fair bit faster than Kev's, the only
<br>
>problem is that is sends unformatted ASCII text to my terminal
program, but <br>
>I have no simple converters to fix this to binary...<br>
><br>
>Here is the .s code<br>
><br>
><br>
>PROGRAM 0 68 BYTES<br>
><br>
> DPY-FIRST /1 LAST
/2 :Sets Start and End of
ROM<br>
> REG1 = REG1 AND
FFF0 :<br>
><br>
>1: LABEL 1<br>
> READ @ REG1<br>
> AUX-$E+<br>
> INC REG1<br>
>
DPY-$1
:Displays next memory read<br>
> IF REG2 >= REG1 GOTO 1<br>
> STOP<br>
><br>
>A bit shorter...and faster dumping, can anyone (Zonn?) edit the small
<br>
>Hex32Bin.EXE or Hex2BIN32.EXE to just handle raw ASCII conversion to
Binary?<br><br>
Sure, just send me an example of the raw ASCI dump, and I'll modify the
program<br>
to convert the data.<br><br>
-Zonn</blockquote></html>
</x-html>
Received on Thu Aug 01 18:50:28 2002
This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 18:40:46 EST