RE: Which B&K adapter to use for Nintendo?

I can't find a part number for this. Is there any other part number on this
tube?

Is anyone interested in having me scan this BK setup chart? There are about
60 pages.

Matt

-----Original Message-----
From: Noel Johnson [mailto:nej@airmail.net]
Sent: Wednesday, July 31, 2002 7:29 AM
To: Matt Rossiter
Cc: TechToolsList@flippers.com
Subject: Re: Which B&K adapter to use for Nintendo?

Matt,

While we're on the subject, one last favor to ask. Which adapter for a
WG7000 series 19" monitor, please? Tube model is Philips MVR48ABK05X.
It has a smaller neck than the typical 19" raster tube.

Any help appreciated!
Noel

Matt Rossiter wrote:
>
> 510UTB22 is the tube number and yes it uses adapter 23. Heater voltage
> should be 6.3
>
> Matt
>
> -----Original Message-----
> From: owner-techtoolslist@www.flippers.com
> [mailto:owner-techtoolslist@www.flippers.com]On Behalf Of Noel Johnson
> Sent: Thursday, July 25, 2002 2:03 PM
> To: TechToolsList@flippers.com
> Subject: Re: Which B&K adapter to use for Nintendo?
>
> Thanks Matt!
>
> Well the only sticker on the tube (which is out of a DK) is in Japanese,
> but it has these numbers on it:
>
> M2B178819
> 510UTB22
>
> Hope this helps...
>
> Regards,
> Noel
>
> Matt Rossiter wrote:
> >
> > If you give me the model # of the tube I can tell you. Usually it's 23
or
> > 24.
> >
> > Matt
> >
> > -----Original Message-----
> > From: owner-techtoolslist@www.flippers.com
> > [mailto:owner-techtoolslist@www.flippers.com]On Behalf Of Noel Johnson
> > Sent: Thursday, July 25, 2002 1:33 PM
> > To: TechToolsList@flippers.com
> > Subject: Which B&K adapter to use for Nintendo?
> >
> > I just learned to use my B&K. Could someone confirm that adapter 23
> > is used on Nintendo Sanyo monitors? I don't have the current setup list
> > from B&K.
> >
> > Thanks in advance!
> >
> > Noel
Received on Wed Aug 07 11:30:42 2002