Re: pole position 1&2 rom's & checksum

You should be able to grab the PP2 ROMs and just compare...

http://www.marvin3m.com/video/pp1topp2.zip

htbsusa wrote:

> I am pulling them out and checking each one in a programmer in the
> case of the mame rom's I am loading them in the programmer and only 2
> matched your checksum sheet they are Atari boardsI am using Andromeda
> Research Labs EPROM+ Programming Systemhttp://www.arlabs.com the
> fluke 9010a with pole h is passing the boards ,,when they go to run
> they get error rom 10 thanks Tony
>
> -----Original Message-----
> From: Kev [mailto:KKlopp@erols.com]
> Sent: Wednesday, January 29, 2003 3:01 PM
> To: arcade11@htbsusa.com
> Subject: Re: pole position 1&2 rom's & checksum
>
> You realize that Fluke 'Rom Signatures' <> Checksums. You
> are working with NAMCO or Atari boards? There will be some
> differences. You either have to write a routine to calculate
> the summation checksums or you need to pull the ROMs out &
> checksum them in a EPROM reader. Kev
>
> ----- Original Message -----
> From: sales@htbsusa
> To: TechToolsList@flippers.com
> Sent: Wednesday, January 29, 2003 2:34 PM
> Subject: pole position 1&2 rom's & checksum
> does anyone have a list of checksum and rom's
> file that matchtried kev's checksum and mames roms
> and only 2 matched if you can send that would be
> great have some boards that I am having a hell of
> a time with one has rom 10 error ??no rom 10 error
> in the manual ???and the others need to program
> rom's tried mame but they are all mis marked like
> 2f there is no 2f on the cpu thanks Tony email
> @arcade11@htbsusa.com
>
Received on Wed Jan 29 16:47:20 2003