RE: [techtoolslist] Uploading binary images from Fluke 9010a

What about the binary programs though? Look at programs 12 - 18
http://rossiters.com/games/fluke-async.txt

Matt

-----Original Message-----
From: owner-techtoolslist@www.flippers.com
[mailto:owner-techtoolslist@www.flippers.com]On Behalf Of John Robertson
Sent: Wednesday, October 08, 2003 3:52 PM
To: techtoolslist@www.flippers.com; techtoolslist@www.flippers.com
Subject: Re: [techtoolslist] Uploading binary images from Fluke 9010a

James is correct, you can transfer the programs that are loaded with a tape
out the RS-232 port and store on a PC. The software is on the TTL ftp site
ftp.flippers.com/TTL/Fluke . RKSIC.exe is one of them

John :-#)#

At 04:45 PM 08/10/2003 -0400, James Bright wrote:

>For the program itself? I have not used the tape option myself, but I
>thought it was basically: (1) load the program(s) from tape, (2) transfer
>the programs loaded via RS-232 to computer. (I.e. RKSIC or FIDE).
>
>Or is there other binary data that is on the tape?
>
>JB
>
>--James Bright
>www.QuarterArcade.com
>Restored Arcade Games for your Home
>
>
>----- Original Message -----
>From: "Matthew Rossiter" <matt@veriosc.com>
>To: <techtoolslist@www.flippers.com>
>Sent: Wednesday, October 08, 2003 4:34 PM
>Subject: [techtoolslist] Uploading binary images from Fluke 9010a
>
>
> > Did anyone ever figure out how to transfer binary images such as those
on
> > tape for the clock module? I happen to have the tape with the binaries,
>the
> > clock module and the Async. Sig. Option installed on my fluke 9010a. It
> > would be nice to keep an archive in case my tape goes bad or something.
> > I'll have to do a little research on that.
> >
> >
> > Matt
> >
Received on Wed Oct 08 18:16:10 2003