Re: [techtoolslist] 9100 Floppy drives.

I'm still working on this part-time. Still need replacements for defective
720 drives on the 9100. Al Kossow gave me a link of interest - and I
followed it to TEAC PDF library:
http://www.teac.com/DSPD/catalog.htm and scroll down to the floppy drives.
Nothing on the 720 drives though - but I've asked their tech support for
help...

John :-#)#

At 05:07 PM 14/09/2003, John Robertson wrote:
>I have a couple of dead floppies on my 9100's and was wondering if anyone
>knows how to set up a 1.44 to run on them. The Drive Select has to "0",
>but then nothing much happens. The latest version of the System setup disc
>(Rv1.4 - for SCSI) seems to support the Canon HD drive but I have no idea
>what drive that was supposed to be.
>
>The drives supported (Rv1.4) are:
>Canon (MD350)
>Sony F17
>TEAC FD235
>Mitsu(mi?) MF355C
>Canon HD (unknown model)
>
>The service manual says (Pg 3-34) that the floppy control lines are:
>DS0, DS1 (Drive Selects - D0 for 9100)
>Spare (not used - is this the High Density enable?)
>MINI (selects floppy clock speed for 5-1/4 & 3-1/2 or 8")
>DENS (single or double density - but how does this fit in with a Canon HD
>drive?)
>P0, P1 (write pre-compensation time 0, 125ns, 250ns, or 375ns)
>EN-ENT (Floppy Interrupt)
>
>Anyone have info on any of these drives and can identify the parameters
>needed?
>
>Thanks!
>
>John :-#)#
>
>How to subscribe or unsubscribe from TTL
>
>To do either you send email to "MajorDomo@flippers.com" and in the body
>you state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist",
>note that the Subject is "" (Blank)...
>
>FTP site is: ftp://ftp.flippers.com/TTL/

If you ever want to (un)subscribe yourself with TTL, you can send mail to:
<Majordomo@flippers.com>
with the following command in the body of your email message:
(un)subscribe techtoolslist
or from another email account, besides xxx@yyy.com:
(un)subscribe techtoolslist xxx@yyy.com
Received on Thu Dec 4 02:12:13 2003