Re: PROMLink with Data I/O 29B

Thanks Mike. This is what I was looking for.

JB

--James Bright
www.QuarterArcade.com
Restored Arcade Games for your Home

----- Original Message -----
From: "Mike Haaland" <mike@mikesarcade.com>
To: <techtoolslist@flippers.com>
Sent: Tuesday, April 06, 2004 1:32 PM
Subject: RE: PROMLink with Data I/O 29B

> > I'm having problems getting PROMLink to work with my Data I/O
> > 29B with UniPak 2B.
>
> Yes, it does require a null modem adaptor or cable. I generally
> set the 4 dips inside as follows: 1 & 2 off, 3 & 4 on. Then
> set the dial on the back to E = 9600 baud. Then set promlink
> programmer port to 9600/8/n/1. The main problem most folks have
> is getting the cable right and determining which serial port they
> have the burner on.
>
> Good luck,
>
> - Mike -
>
> If you ever want to (un)subscribe yourself with TTL, you can send mail to:
> <Majordomo@flippers.com>
> with the following command in the body of your email message:
> (un)subscribe techtoolslist
> or from another email account, besides xxx@yyy.com:
> (un)subscribe techtoolslist xxx@yyy.com

If you ever want to (un)subscribe yourself with TTL, you can send mail to:
<Majordomo@flippers.com>
with the following command in the body of your email message:
(un)subscribe techtoolslist
or from another email account, besides xxx@yyy.com:
(un)subscribe techtoolslist xxx@yyy.com
Received on Tue Apr 6 13:58:33 2004