Re: Fluke 9100 on Tron hardware

You beat me to it, but i was going to add that a 9010 with a Z80 pod equipped
with Z80A processor gives the exact same results too...

Martin.

On Sunday 02 May 2004 03:40, Chris Loggans wrote:
> Changing the cpu in the POD to a Z80B did not help.
> Any more suggestions?
>
> Thanks,
> -Chris
>
> --- Chris Loggans <cloggans@yahoo.com> wrote:
> > > What z80 type of pod are you running?
> >
> > I've tried both a regular Z80 and a Z80/AA pod.
> > Same
> > results from both. I'm going to try John's
> > suggestion
> > and change the chip and see if that helps.
> >
> > Thanks,
> > -Chris
> >
> > If you ever want to (un)subscribe yourself with TTL,
> > you can send mail to:
> > <Majordomo@flippers.com>
> > with the following command in the body of your email
> > message:
> > (un)subscribe techtoolslist
> > or from another email account, besides xxx@yyy.com:
> > (un)subscribe techtoolslist xxx@yyy.com
>
> If you ever want to (un)subscribe yourself with TTL, you can send mail to:
> <Majordomo@flippers.com>
> with the following command in the body of your email message:
> (un)subscribe techtoolslist
> or from another email account, besides xxx@yyy.com:
> (un)subscribe techtoolslist xxx@yyy.com
If you ever want to (un)subscribe yourself with TTL, you can send mail to:
<Majordomo@flippers.com>
with the following command in the body of your email message:
(un)subscribe techtoolslist
or from another email account, besides xxx@yyy.com:
(un)subscribe techtoolslist xxx@yyy.com
Received on Sun May 2 05:44:32 2004