<x-flowed>At 21:25 8 11 2004, you wrote:
>For a working 6502 pod, find a 6800 and pop in a 6502 CPU, and a couple of
>changes on the pod PCB. Check the schematics (soon to be back up!) in the
>PDF for the 6502 pod. The same Eprom code is used in each, the lower half
>is 6800 and the upper half is 6502! I figure it would be fairly simple to
>hack a pod so it would do both CPUs...I see a hole with a 40 pin ZIF
>socket, and a toggle switch....
Yes I've seen that on the schematics, alas both my 6800 PODS are different
to the jumper switchable one :o(
I tried doing a major hack on one of them to try and upgrade it to match
the alternate 6800 (&6502) POD but I could never get it to pass self test :o(
Dave Langley
www.robotron-2084.co.uk
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
</x-flowed>
Received on Wed Nov 10 09:21:04 2004
This archive was generated by hypermail 2.1.8 : Mon Sep 12 2005 - 19:58:48 EDT