RE: Jump start on USB to Fluke pod adapter

Get that figured out and the 9100A I/O module figured out, and we can
just write the software ourselves... I'd volunteer if the hardware
interface is worked out.

JB

--James Bright
www.QuarterArcade.com
Restored Arcade Games for your Home

> -----Original Message-----
> From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-
> bounces@flippers.com] On Behalf Of Mike Coates
> Sent: Wednesday, April 06, 2005 4:59 PM
> To: Adam Courchesne; Technical Tools Mail List
> Subject: Re: [Techtoolslist] Jump start on USB to Fluke pod adapter
>
> neat - get that sorted and we can knock up a new front end with lots
of
> new features.
>
> I keep meaning to look into it, and I have now got the dlp-usb245m
> module that I may use - very handly little gadget, already hooked it
to
> an arcade PCB to allow me to dump the encryption table.
>
> Adam Courchesne wrote:
> > I'm taking a graduate course in Real Time Embedded systems and for
my
> > final project, am developing a USB to Fluke POD adapter for use with
> > my Fluke 9010A emulator.
> >
> > So not only do I get to tinker with what interests me but I end up
> > getting credit for it.
> > :-)
> > -Adam
> > _______________________________________________
> > Techtoolslist mailing list
> > Techtoolslist@flippers.com
> > http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Apr 06 16:54:15 2005