RE: Fluke 9010A and Space Invaders

Now, if only I can disable the pot timeout thing...

Tony

--- Phillip Eaton <inbox@phillipeaton.com> wrote:
> I've had similar problems on PCBs that run fine with
> a CPU. I think it may
> have happened on my L-shaped SI.
>
> As Martin said, I just disabled the UUT test and it
> worked fine.
>
> Phil
>
> -----Original Message-----
> From: techtoolslist-bounces@flippers.com
> [mailto:techtoolslist-bounces@flippers.com]On Behalf
> Of Phil Morris
> Sent: 13 April 2005 21:30
> To: techtoolslist@lists7.flippers.com
> Subject: [Techtoolslist] Fluke 9010A and Space
> Invaders
>
>
> I have a Fluke 9010A with an 8080 pod - said
> combination works fine with
> every '3-layer' Taito Space Invaders boardset that
> I've used it with, but
> if I try it on *good, working* 'L-shaped' Taito
> boards I get the error:
>
> UUT Power Fail
>
> This has me puzzled - why should the Fluke work fine
> with one type of
> boardset, yet not the L-shaped set, even though said
> L-shaped sets work
> perfectly with an 8080 in the CPU socket?
>
>
>
> Thanks,
> Phil
>
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
>
http://seven.pairlist.net/mailman/listinfo/techtoolslist
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
>
http://seven.pairlist.net/mailman/listinfo/techtoolslist
>

                
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Apr 13 15:14:28 2005