Re: Fluke 9010A and Space Invaders

<x-flowed>Hmm, I wonder if the SI boardset left out a ground that they thought
wasn't needed by the CPU, but the Fluke is expecting...how many
grounds does the 8080 want? Too lazy to look it up.

John :-#)#

At 10:08 PM +0000 4/13/05, Martin White wrote:
>Umm, go into the setup and disable the UUT Power Fail check??
>
>I trust the power supply voltage isn't just too low down to the PSU or maybe
>voltage drop across an adapter?
>
>Soory, very obvious points i know, but you gotta mention them :)
>
>On Wednesday 13 April 2005 20:57, Phil Morris wrote:
>> >Phil,. I've used the 8080 pod on the 2 board and it
>> >works fine.
>> >
>> >I got that error once with one of the clock signals
>> >being bad by a broken trace.
>> >
>> >Evidently, the pod check out all the powers and the
>> >clock signals going in for integrity.
>>
>> But that's the thing - the boardset *does* work perfectly with a normal
>> 8080 in the CPU socket.
>>
>> I too was thinking of a clock signals problem, but they all check out okay.
>>
>>
>> Phil
>>
>>
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist@flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>_______________________________________________
>Techtoolslist mailing list
>Techtoolslist@flippers.com
>http://seven.pairlist.net/mailman/listinfo/techtoolslist

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                  www.flippers.com
"Old pinballers never die, they just flip out"
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
</x-flowed>