Re: Replacing a Fluke 9100a disk drive

<x-flowed>It is very difficult to find a drive that will work with the 9100's.
I got a couple from Shy @ Navatek and might recommend you ask him. I
tried about ten different ones before giving up and buying one from
him...

A floppy emulator interface anyone?

John :-#)#

At 5:26 PM +0100 5/2/05, Chris Hardy wrote:
>I've got a few drives here..
>
>The main problem I'm having with the pc drives is that most manufacturers
>are removing the switches or even the ability to change the DS0/DS1
>settings.
>
>The drives I have are..
>
>720k Mitsumi D357T2 (amiga)
>720k Chinon fb-354 (amiga)
>
>PC 1.44m
>
>Panasonic JU-257A606pc (loads of unpopulated switches)
>TEAC FD-235HF-7291 (uses 0 ohm smt resistors as jumpers..)
>TEAC FD-235HF-7291 (slightly different model with different jumper positions
>smt again)
>
>and the drive I tested it with as it had a DS0/DS1 jumper which is a
>
>Sony MPF920-F
>
>Chris
>
>
>----- Original Message -----
>From: "Rodger Boots" <rlboots@cedar-rapids.net>
>To: "Technical Tools Mail List" <techtoolslist@flippers.com>
>Sent: Monday, May 02, 2005 11:17 AM
>Subject: Re: [Techtoolslist] Replacing a Fluke 9100a disk drive
>
>
>> Assuming your problem IS the drive and not the controller, what PC drive
>> make/model are you trying to use?
>>
>
>_______________________________________________
>Techtoolslist mailing list
>Techtoolslist@flippers.com
>http://seven.pairlist.net/mailman/listinfo/techtoolslist

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                  www.flippers.com
"Old pinballers never die, they just flip out"
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
</x-flowed>