Hi John !
Thank you for you clue ! I'll download those manuals...
A have good news... I decided to open my 9010A, checked connections and obvious parts such as Z80, 6520 ( discovered it is the same as 6821), ROMs... and nope... After think for a few minutes, i remembered that i bought some 4116 from Mark Craps some time ago, changed all RAMs and voilá !!!! My Fluke is back on life !!!
The problem was a faulty 4116 RAM on bank 2.
Thank you guys for your pray ;)
Jose Luiz
On Tue, 18 Oct 2005 16:39:55 -0700, John Robertson <jrr@flippers.com> escreveu:
> De: John Robertson <jrr@flippers.com>
> Data: Tue, 18 Oct 2005 16:39:55 -0700
> Para: Technical Tools Mail List <techtoolslist@flippers.com>
> Assunto: Re: [Techtoolslist] Fluke 9010A Troubleshooting
>
>
> Hi Jose,
>
> Have you copies of the PDF manuals? There is a
> service manual in that batch that should assist
> in troubleshooting your 9010. You can check the
> ROM checksums against the stored ones as well.
>
> John :-#)#
>
> At 7:57 PM -0200 10/18/05, Jose Luiz Martins wrote:
> >Hi Folks,
> >
> >
> >I need one help from you guysŠ
> >
> >One year ago, I last use my fluke, just to test
> >one POD acquired on Ebay (6809). It tested the
> >pod Okay, I turned it of and left the 9010A unit
> >on my workbench unused for more than one year,
> >due to a hurry in my job. Today, for my surprise
> >(a bad one), when I decided to troubleshoot one
> >Pac Man board, my fluke does not bootŠ just
> >beeps every 3 or 4 seconds, and nothing on the
> >displayŠ
> >
> >I know it's could be very difficult to diagnose
> >it by email, but once I live in a country that
> >these devices are unknown, I don't have some way
> >to service this stuff down here.
> >
> >Try to fix it is the only way to have it working
> >again, or pay about 300% in customs taxes and
> >shipping, drive about 200 miles to take it on
> >the customs, explain what hell is it for 100
> >people (unfortunately I live in a country with
> >too much burocracy), to get another one from
> >EbayŠ So, I'll appreciate any help !
> >
> >
> >Thank you very much !!!
> >
> >
> >José Luiz Martins
> >
> >P.S. I'm asking your patience in advance for
> >some English mistakes, I'm from Brazil and my
> >natural language is PortugueseŠ the unique
> >country in South America that speaks Portuguese
> >L Thank you !
>
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Oct 19 12:47:03 2005
This archive was generated by hypermail 2.1.8 : Wed Oct 19 2005 - 23:50:01 EDT