Re: Fluke 9010A Input voltage

I seem to recall you had to unplug the mains lead, then slide down a
panel, and you could then remove and reinsert a plastic thing to then
say '220' or '240' showing on the outside.

of course, that doesn't mean all flukes have the same setup

Filip Hautekeete wrote:
> Steve,
>
> There is no panel nor switch on the back. However there is a note
> referring to the manual (orientation of the mains circuit board).
> Unfortunately I was not able to locate any information about this in the
> service manual. I was hoping someone had done this before and could tell
> me immediately what actions to perform.
>
> Best regards,
>
> Filip
>
> ----- Original Message -----
> *From:* Steve C <mailto:steves-lists@dsl.pipex.com>
> *To:* 'Technical Tools Mail List' <mailto:techtoolslist@flippers.com>
> *Sent:* Monday, October 31, 2005 7:59 PM
> *Subject:* RE: [Techtoolslist] Fluke 9010A Input voltage
>
> Yes, there is a panel on the back that allows voltage selection – I
> can’t remember how but it was easy.
>
>
> Steve
>
>
>
> -----Original Message-----
> *From:* techtoolslist-bounces@flippers.com
> <mailto:techtoolslist-bounces@flippers.com>
> [mailto:techtoolslist-bounces@flippers.com] *On Behalf Of *Filip
> Hautekeete
> *Sent:* 31 October 2005 13:27
> *To:* techtoolslist@flippers.com <mailto:techtoolslist@flippers.com>
> *Subject:* [Techtoolslist] Fluke 9010A Input voltage
>
>
>
> Hi all,
>
>
>
> Is there any easy way to switch the Fluke 9010A from VAC 120
> (factory installed) to VAC 240 ?
>
>
>
> Best regards,
>
>
>
> Filip
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Mon Oct 31 14:47:34 2005