Actually the Fluke docs are here ('borrowed' from TTL ftp site
obviously!) glad to have them out there!
http://fmbbowen.com:39353/VideoGames/DLH_DVDs/Test%20Equipment/Fluke/9010A%20Base/
If you go back two directories you will find lots of old TTL and
others archives.
John :-#)#
At 9:54 PM -0500 10/31/05, Franklin Bowen wrote:
>Here are some docs for it (from the DLH DVDs):
>
>http://fmbbowen.com:39353/VideoGames/DLH_DVDs/Test%20Equipment/Eprom%20Programmer%20Software/Data-IO%20Unisite%20Programmer%20Software/
>
>
>At 04:14 PM 10/31/2005, you wrote:
>>Good point Rodger, I think that was hidden in the yada, yada part
>>of the instructions for changing voltage that I didn't quote...
>>
>>Now to find the PDF of the 9010A manuals. They aren't up on the ftp site:
>>ftp://ftp.flippers.com/TTL/Test%20Equipment/ the backup CD is
>>buried somewhere in my shop...
>>
>>John :-#)#
>>
>>At 3:40 PM -0600 10/31/05, Rodger Boots wrote:
>>>Be careful, a lot of times when you change voltage you also should
>>>change the fuse.
>>>In the case of the 9010A the line fuse should be 1A fast blow for
>>>120 V and 1/2 A fast blow for 240 V.
>>>
>>>
>>>
>>>Filip Hautekeete wrote:
>>>
>>>>Hello Steve,
>>>> You are correct. Thanks to John Robertson I figured out there is
>>>>a slide card for voltage selection behind the fuse panel. No need
>>>>to drag the systems out of your garage ;-)
>>>> Thanks for your help!
>>>> Filip
>>_______________________________________________
>>Techtoolslist mailing list
>>Techtoolslist@flippers.com
>>http://seven.pairlist.net/mailman/listinfo/techtoolslist
>
>--
>Franklin Bowen (Franklin@Bowen.net)
>http://fmbbowen.com:39353/
>
>_______________________________________________
>Techtoolslist mailing list
>Techtoolslist@flippers.com
>http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Mon Oct 31 22:57:24 2005
This archive was generated by hypermail 2.1.8 : Mon Oct 31 2005 - 23:50:01 EST