Re: Fluke 9100a -- info on replacement -- scsi withcompact flash

Corey ,
Still need utilities to install the scsi drive.....wasn't able to obtain
them.
Went round and round looking but with no success......they were serialized
or needed
non serialized utilities......think that no one has or wanted to
offer.........
Still any help would be appreciated......
AL

----- Original Message -----
From: "Corey Stup" <Corey@Stup.net>
To: "Technical Tools Mail List" <techtoolslist@flippers.com>
Sent: Sunday, January 08, 2006 2:23 AM
Subject: Re: [Techtoolslist] Fluke 9100a -- info on replacement -- scsi
withcompact flash

> AL SACCO_comcast wrote:
>
>> have fluke 9100a with bad scsi drive.....
>> would like to replace with compact flash....
>> any info would be appreciated.....
>> AL
>
> There are SCSI interface based flash drives that I've successfully
> installed into 9100's. I have used several sizes, including 256MB, 512MB
> and 1024MB (although anything higher than approx 360MB suffers from the
> disk being too large for some of the 9100 utilities same as the platter
> based SCSI drives.)
>
> My most recent experiments have been with SCSI "adaptors" that allow the
> use of PCMCIA flash cards. Some success so far, but I've not had time
> to fully test them as of yet.
> The cheapest and easiest replacement however, is to get a tested working
> SCSI harddrive - lots of the ones from old Macs are available on eBay and
> are cheap.
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Sun Jan 8 03:23:33 2006