Re: Data I/O 29B cable?

Which I believe was patched by, and came from Mike Coates at the link he
gave :o)

Mike?

On 1/3/06 22:21, "Arcadeforever" <arcadeforever@gmail.com> wrote:

> and there is always www.mikesarcade.com <http://www.mikesarcade.com> too he
> has a dos program that runs mine great!
>
> -AF
>
> On 3/1/06, Mike Coates <mike@the-coates.com> wrote:
>> cable info - look here (and some other bits_
>> <http://www.leopardcats.com/dio/dataio29b.htm>
>>
>> copy of program hacked to run on newer / faster PC's - look here
>> <http://www.arcades.org.uk/techy.htm> (near the bottom of the page)
>>
>> Joseph Magiera wrote:
>>> >
>>> > In an attempt to be able to read & program 2708's, I bought a Data I/O
>>> > 29B w/Unipak 2B programmer off ebay. No manuals, and "untested" of
>>> > course, but I can pray that it works. Anyways, I've seen only one of
>>> > these in actual use before. The guy told me he had trouble getting a
>>> > proper cable for it. In the end he ended up hacking a cable to get the
>>> > proper pin configuration. It looked pretty ugly, but it did work. Does
>>> > anyone know exactly what kind of cable I need to hook it up to my PC?
>>> > Any other tips or tricks for this beast? Thanks,
>>> >
>>> > Joe
>>> > joemagiera@ameritech.net
>>> >
>>> >
>>> > ------------------------------------------------------------------------
>>> >
>>> > _______________________________________________
>>> > Techtoolslist mailing list
>>> > Techtoolslist@flippers.com
>>> > http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist@flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>
>

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Mar 1 17:29:21 2006