Re: Fluke 9010

Hi AL,
 
Yes I'm still looking for a replacement CPU for the tape unit. However
the days of me having access to equipment to program one are long gone.
 
Chris

        -----Original Message-----
        From: techtoolslist-bounces@flippers.com
[mailto:techtoolslist-bounces@flippers.com] On Behalf Of AL
SACCO_comcast
        Sent: 27 November 2006 04:20
        To: Technical Tools Mail List
        Subject: Re: [Techtoolslist] Fluke 9010
        
        
        Chris ,
        still looking for 8041/8741 mpu for fluke 9010 tape reader ?
        if so , let me know.....
        AL

                ----- Original Message -----
                From: Chris Toseland <mailto:Chris@muppzlab.co.uk>
                To: TechToolsList@flippers.com
                Sent: Sunday, November 19, 2006 7:47 AM
                Subject: [Techtoolslist] Fluke 9010

                Hi folks,
                 
                This maybe a long shot but does anyone have or can
duplicate the controller CPU for the tape drive unit on a 9010?
                My tape unit doesn't work, I've checked the sensors and
even tried driving the CPU input pins directly all to no avail so I and
can only assume that the CPU is dead.
                 
                Thanks
                 
                Chris

                
________________________________

                _______________________________________________
                Techtoolslist mailing list
                Techtoolslist@flippers.com
                http://seven.pairlist.net/mailman/listinfo/techtoolslist
                

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Thu Nov 30 14:55:06 2006