Re: booting 9100 from floppies

just tried it on my system (boot 2.1, software 4.1 (b)) and it did indeed
boot from the v6 floppies i made up...

now what i need to do is to upgrade the system software on the unit itself
from the v6 disks, as the softkey f2/f4 just let me boot from floppy that
one time....

i will try out booting from other discs in the v6 package tomorrow to see if
i cantransfer the system over.. once again, can anyone remember the pdf that
had all these software upgrade instructions in? if i had that, i wouldn't
need to keep bugging you all about it ;)

i'm stoked that i actually got it to boot from floppies, something that i
thought wasn't possible without original discs :)

andy

----- Original Message -----
From: "Mark Hooks" <markhooks@earthlink.net>
To: "Techtoolslist" <Techtoolslist@flippers.com>
Sent: Thursday, September 28, 2006 4:43 PM
Subject: [Techtoolslist] booting 9100 from floppies

> "just hold down SOFTKEY-F2-F4 " Just to remind those trying this, you must
> first upgrade the ROMs on the PCB before that command works. I tried it
> with
> version 2 ROMs and it wouldn't recognize that series of keystrokes.

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Thu Dec 28 16:09:25 2006