ok, I suppose I should have tried it before posting, but the process of
writing the email made me think about the disk install sequnce as i
suspected...
sure enough, i formatted the drive and installed in the order i thought
might make sense, and it now works! i updated my page to reflect this...
so now to install more ram and get my machine from 2mb to 4mb....
Andy
----- Original Message -----
From: "andy" <warlords@punkass.com>
To: "Technical Tools Mail List" <techtoolslist@flippers.com>
Sent: Wednesday, January 10, 2007 7:14 PM
Subject: [Techtoolslist] Fluke 9100 pod recognition after software install
> hi all.
>
> Well, thanks to list members (Al, Corey - thanks!) i got the bits i needed
> to get my 9100 hard disk replaced... i can now use it again for the most
> part.. as previously threatened, i have made a page up of the ordeal
> involved in the hopes it will probably save someone else a whole bunch of
[snip]
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Jan 10 16:28:08 2007
This archive was generated by hypermail 2.1.8 : Wed Jan 10 2007 - 20:50:00 EST