Re: Fluke 9100 pod recognition after software install

UPS on the 2 boxes was 44.72

I had NO idea these things were so damn complicated - I will stick to the
9010 for my own use :)
Remember I have one more main unit, complete, for sale - I also sold one
that I may have to take back (bad HDD) - if you have any interest in them
Art

----- Original Message -----
From: "Alex Yeckley" <ayeckley@sierralobo.com>
To: "'Technical Tools Mail List'" <techtoolslist@flippers.com>
Sent: Wednesday, January 10, 2007 10:56 PM
Subject: Re: [Techtoolslist] Fluke 9100 pod recognition after software
install

> >sure enough, i formatted the drive
>
> Anyone familiar with the "controller returned error f6h" message? I'm
> getting that consistently when I try to format my Miniscribe, regardless
> of
> which interleave option I select (0-6). I've swapped out the MFM/SCSI
> adapter as well as the interface board. IIRC, I'm even getting that
> message
> using different drives. Running ROM rev 5, and using Service Disk image
> 1.4
> that Andy provided earlier today.
>
> Alex
> ----
> ayeckley@elektronforge.com
> www.elektronforge.com
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Jan 10 23:05:47 2007