Re: Looking for 24-pin IDC flat cable plug

Jameco has them.

Thad

Matt Rossiter wrote:
> I'm trying to find a source for a 24-pin IDC flat cable plug that is .600
> inch wide (like a standard eprom). Mouser has part number 151-2P24 - but
> it's only .300 inch wide (like a standard 74 series ttl chip).
>
> I found this part here --> http://tinyurl.com/3aqqy6 - but I don't think I
> can order directly from this company. I sent them an email though.
>
> Anyway, I want to build a connector that allows me to separate the Sega XY
> timing and control boards far apart, but I seem to be having a hard time
> locating this plug. http://games.rossiters.com/24p-connector.jpg
>
> Just wondering if anyone knows a good source.
>
> Matt
>
> PS - Action Electronics is a good source if you want to make your own
> Cinematronics connectors.
> http://www.action-electronics.com/computerconnectors.htm
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Feb 14 08:18:36 2007