Re: Data I/O 29B on XP?

I can confirm the version below works on my Dell PIII-700 and XP. Is your
cable OK? You do need a specifically wired cable as shown in the Data I/O
manual and to set the baud rate (going from my memory here) to 9600 N 8 1.
Also, is the serial port enabled in your BIOS?

Best Regards,

Bill
-----Original Message-----
From: techtoolslist-bounces@flippers.com
[mailto:techtoolslist-bounces@flippers.com] On Behalf Of Arcadeforever
Sent: Monday, November 26, 2007 9:08 PM
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] Data I/O 29B on XP?

Works fine for me too, download the version from mikes arcade.com

On Nov 26, 2007 3:44 PM, Joseph Magiera <joemagiera@ameritech.net> wrote:

> Can anyone confirm that they can interface with a Data I/O 29B using a PC
> running Windows XP?
>
> I finally am going to try to get my Data I/O going, and I plan on using a
> Pentium III, 500mg PC, loaded with Windows XP. A pretty unpowerful
computer
> by today's standard, but should be plenty for running the Data I/O
software
> (if it can indeed work on XP).
>
> Any tips or tricks to note on installing/running? Thanks,
>
> Joe
> joemagiera@ameritech.net
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>

-- 
Wayne Moore
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist