Re: Diameter of leads

Just to answer my own query, yes, 0.025" has apparently been the
industry standard for these things for about the last 30 years.

So, I found a place selling them very reasonably in the UK and have a
pack of 10 on order, more to follow later when I have more cash :)

Martin.

On 29 Jan 2008, at 20:17, martin@guddler.co.uk wrote:

> Hi,
>
> I've been trying to get hold of some "grabbers" for some test kit.
> Namely to go on the end of the fly leads on both the 9100 clock
> module and also an HP5006 sig. analyser.
>
> I've been able to find grabbers with "0.025 inch square output
> pins". Does anyone know if this is right? I can't get access to the
> kit right now to measure the diameter of the ends of the leads. I'm
> not sure if I could measure them very well anyway.
>
> I don't desperately want to order over 20 or more of the wrong thing!
>
> Thanks,
> Martin.
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Jan 30 09:17:35 2008