Re: Introduction and manuals

Tim Matthews wrote:
> Hi. I've just subscribed to this list after lurking in the archives for some
> months.
>
> I'm in the Midlands, UK and fix arcade boards in my spare time. I only
> picked
> this up about a year ago but like to think I'm a reasonably quick learner. I
> prefer
> the earlier era hardware but also work on JAMMA boards.
>
> I'm working on a system to reverse engineer PALs to improve the depth of
> coverage in MAME and aid future repairs. I'm hoping to end up with a similar
>
> solution to Leopardcats pal-cracker but using a standard EPROM programmer
> and easy(ish) to use software.
>
> Anyway, I managed to obtain a PDF of the manual for Rohde & Schwarz LAC64
> logic analyser which I've uploaded into incoming at flippers.com. It took
> more than
> a few pleading emails to R&S but it was worth it! I think it's the only
> freely available
> copy and I hope somebody else finds it useful. If anybody knows of the CPU
> specific
> pods (LAS-Z14, LAS-Z30) used to disassemble from the data bus I'd appreciate
> a pointer.
>
> Finally, I've just bought an ABI Boardmaster 4000 and am looking for
> manuals,
> firmware and anything of interest. I've got the programming manual from TTL
> which I'm working through. I'd appreciate any tips or pointers too!
>
> thanks for reading,
> tim
>
Hi Tim,

Welcome to the group, I have transfered your file to the new
"Rhode&Schwarz" directory in the Test Equipment section of the FTP site.

John :-#)#

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist