Re: Eprom programmer interfaces needed.

I surely don't.

The MCLR voltage is only 13 volts, I think, and the current is very low.
Could you make one? You might try looking at the PICKit1 schematic for
ideas.

Jim

On Sat, Jun 28, 2008 at 4:43 AM, Steve Larkins <mail@nessandsteve.plus.com>
wrote:

> Hello all,
> I was wondering if there is anyone out there that may have some information
> or even the modules available for the following.
> - Dataman omnipro2 PIC socket adapter
> - MQP 200 Pic socket adapter & PROM socket adapter
>
> I think the pic adapters are quite simple but I have been told by mqp that
> the PROM interface has to handle the high voltage and current involved in
> programming a prom.
>
> Many thanks
> Steve
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Received on Sat Jun 28 07:25:58 2008